TEKORO Road Marking Paint
Function: For asphalt pavement, cement concrete pavement common marking
Main Ingredient: Heat plastic acrylic resin, pigment, filler, Additives, solvents.
Feature: Fast drying, Excellent Weatherability, Good abrasion resistance, Strong adhesion
Using Method: High Pressure without Air Spraying.
Directions
1. Remove thoroughly the oil, soil, water stain and dust from the surface to be sprayed.
2. Shake the can well for about half a minute before spraying.
3. Apply first on an invisible part to make sure the selected color is well matched
4. Keep 15-30 cm away from the surface to be sprayed.
5. In case of little paint or only gas out, turn the nozzle 180° and try again.
6. During spraying, keep the can upright within a vertical angle of 45°.
7. After use, clear the valve and nozzle by spraying upside down for a few seconds.
Precautions
1. Content under pressure. Keep away from heat, flame, spark and other source of ignition.
2. Do not spray on objects with direct contact of food.
3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment.
4. Avoid applying the lacquer on a rainy or freezing day.
5. Do not clash, puncture, or incinerate the can, even after use.
6. Store in a cool, dry place (45°C); Avoid direct sunlight.
7. Keep out of the reach of children
Audited Supplier 
){kind=link}